Elementary principles of chemical processes : 2005 edition with integrated media and study tools / Richard M. Felder & Ronald W. Rousseau.

Contents;

Part 1. Engineering Problem Analysis.
Chapter 1. _What Some Chemical Engineers Do for a Living.
Chapter 2. _Introduction to Engineering Calculations.
2.0 Instructional Objectives.
2.1 Units and Dimensions.
2.2 Conversion of Units.
2.3 Systems of Units.
2.4 Force and Weight.
2.5 Numerical Calculation and Estimation.
etc.

Chapter 3. _Processes and Process Variables.
3.0 Instructional Objectives.
3.1 Mass and Volume.
3.2 Flow Rate.
3.3 Chemical Composition.
3.4 Pressure.
3.5 Temperature.
3.6 Summary.

PART 2. _MATERIAL BALANCES.
Chapter 4. _Fundamentals of Material Balances.
4.0 Instructional Objectives.
4.1 Process Classification.
4.2 Balances.
4.3 Material Balance Calculations.
4.4 Balances on Multiple-Unit Processes.
4.5 Recycle and Bypass.
4.6 Chemical Reaction Stoichiometry.
4.7 Balances on Reactive Processes.
4.8 Combustion Reactions.
4.9 Some Additional Considerations about Chemical Processes.
4.10 Summary.

Chapter 5. _Single-Phase Systems.
5.0 Instructional Objectives.
5.1 Liquid and Solid Densities.
5.2 Ideal Gases.
5.3 Equations of State for Nonideal Gases.
5.4 The Compressibility Factor Equation of State.
5.5 Summary.

Chapter 6. _Multiphase Systems.
6.0 Instructional Objectives.
6.1 Single-Component Phase Equilibrium.
6.2 The Gibbs Phase Rule.
6.3 Gas–Liquid Systems: One Condensable Component.
6.4 Multicomponent Gas–Liquid Systems.
6.5 Solutions of Solids in Liquids.
6.6 Equilibrium Between Two Liquid Phases.
6.7 Adsorption on Solid Surfaces.
6.8 Summary.


PART 3. _ENERGY BALANCES. _
Chapter 7. _Energy and Energy Balances. __
7.0 Instructional Objectives.
7.1 Forms of Energy: The First Law of Thermodynamics.
7.2 Kinetic and Potential Energy.
7.3 Energy Balances on Closed Systems._
7.4 Energy Balances on Open Systems at Steady State.
7.5 Tables of Thermodynamic Data.
7.6 Energy Balance Procedures.
7.7 Mechanical Energy Balances.
7.8 Summary.

Chapter 8. _Balances on Nonreactive Processes.
8.0 Instructional Objectives.
8.1 Elements of Energy Balance Calculations.
8.2 Changes in Pressure at Constant Temperature.
8.3 Changes in Temperature.
8.4 Phase Change Operations.
8.5 Mixing and Solution.
8.6 Summary.

Chapter 9. _Balances on Reactive Processes. _
9.0 Instructional Objectives.
9.1 Heats of Reaction.
9.2 Measurement and Calculation of Heats of Reaction: Hess’s Law.
9.3 Formation Reactions and Heats of Formation.
9.4 Heats of Combustion.
9.5 Energy Balances on Reactive Processes.
9.6 Fuels and Combustion.
9.7 Summary.

Chapter 10. _Computer-Aided Balance Calculations.
10.0 Instructional Objectives.
10.1 Degree-of-Freedom Analysis Revisited.
10.2 Sequential Modular Simulation.
10.3 Equation-Based Simulation.
10.4 Commercial Process Simulation Packages.
10.5 Final Considerations.

Chapter 11. _Balances on Transient Processes. _
11.0 Instructional Objectives.
11.1 The General Balance Equation . . . Again.
11.2 Material Balances.
11.3 Energy Balances on Single-Phase Nonreactive Processes.
11.4 Simultaneous Transient Balances.
11.5 Summary.


PART 4. _CASE STUDIES.
Chapter 12. _Production of Chlorinated Polyvinyl Chloride.
PVC Chlorination Reaction Chemistry.
Process Description.
Problems.

Chapter 13. _Steam Reforming of Natural Gas and Subsequent Synthesis of Methanol.
Process Description.
Problems.

Chapter 14. _Scrubbing of Sulfur Dioxide from Power Plant Stack Gases.
Process Description.
Problems.

Includes bibliographical references and index p. 669-675