000			03082cam a2200313 a 4500
999			_c379 _d379
001			15499639
003			OSt
005			20210128125015.0
008			081027s2009 ne a b 001 0 eng
010			_a 2008046910
020			_a9780123708953
020			_a0123708958
040			_aBUL _cBUL _dBUL _bENG _eRDA
082	0	0	_a622.2281 _222 _bAIR
245	0	0	_aAir and gas drilling manual / _cWilliam C. Lyons ... [et al.].
250			_a3rd edition.
260			_aAmsterdam ; _aBoston : _bELSEVIER _cc2009.
300			_aXii, (Various pgs). : _bill. ; _c25 cm.
500			_aIntroduction and units 1.1 Objective and terminology 1.2 Engineering calculations and units -- Air and gas versus mud 2.1 Rotary drilling 2.2 Circulation systems 2.3 Comparison of mud and air drilling -- Surface equipment -- Downhole equipment 3.1 Drilling location 3.2 Flow line to the rig 3.3 Wellhead equipment 3.4 Flow line from rig Downhole Equipment 4.1 Rotary drill string 4.2 Drill bits 4.3 Bottom hole assembly 4.4 Drill pipe 5.4 Safety Equipment 4.6 Drill string design -- Compressors and nitrogen generators 5.1 Compressor classification 5.2 Standard units 5.3 Continuous flow (dynamic ) compressor etc -- Direct circulation models 6.1 Basic assumption 6.2 General derivation 6.3 Aerated fluid drilling model etc -- Reverse circulation models 7.1 Basic assumption 7.2 General derivation 7.3 Aerated fluid drilling model 7.4 Stable foam drilling model 7.5 Air and gas drilling model -- Air, gas and unstable foam drilling 8.1 Deep well planning 8.2 Minimum volumetric flow rate and compressor selection 8.3 Bottom hole and injection pressure 8.4 Water injection and formation water influx 8.5 Prime mover fuel consumption 8.6 Conclusion -- Aerated fluids drilling 9.1 Deep well drilling planning 9.2 Aerated fluids drilling operation 9.3 Minimum volumetric flow rates 9.4 Non friction and friction illustrative example 9.5 Conclusion -- Stable foam drilling 10.1 Stable foam rheology 10.2 Deep well drilling planning 10.3 Stable foam drilling operations 10.4 Minimum volumetric flow rates 10.5 Nonfiction and friction illustratrative example 10.6 Conclusion -- Specialized downhole drilling equipment 11.1 DTM 11.2 PDM 11.3 Conclusion -- Underbalanced drilling. 12. 1 Introduction 12.2 Vertical wells 12.3 Directional wells 12.4 Conclusion
504			_aIncludes bibliographical references and index
650		0	_aAir drilling (Petroleum engineering)
650		0	_aGas drilling (Petroleum engineering)
700	1		_aLyons, William C.
700	1		_aLyons, William C. _tAir and gas drilling manual
856	4	2	_3Publisher description _uhttp://www.loc.gov/catdir/enhancements/fy0904/2008046910-d.html
906			_a7 _bcbc _corignew _d1 _eecip _f20 _gy-gencatlg
942			_2ddc _cBO _h622.2281 _i1 _kAIR _m622.2281 AIR _e3rd edition